Instruction manual

Features
Forward and
Follow Me
Group Calling
Headset Options
Multi-Function
Module
Night Service
If an Individual or Group Coverage receiver is on a call when a
Coverage call is received, the receiver hears an abbreviated
ring (if Abbreviated Ring is enabled).
Calls received on a Primary Cover, Secondary Cover, or
Group Cover button ring with the receiver’s (not the sender’s)
Personalized Ringing pattern.
In addition to its primary function, the Delay Ring Interval
provides a delay before calls go to Group Coverage (in addition
to the Coverage Delay Interval), when the sender also has
Individual Coverage and a receiver is available.
On multiline telephones, calls forwarded to an extension ring
with an abbreviated ring at the forwarding telephone and also
ring at the destination telephone. On single-line telephones,
calls forwarded to an extension ring at both the forwarding
telephone and the destination telephone. On both multiline and
single-line telephones, calls forwarded to a telephone number
do not ring at the forwarding telephone.
Outside calls received at the forwarding extension ring as an
internal call at the destination extension (one ring) and do not
receive the normal distinctive ring for an outside call.
Abbreviated Ring is not operable for calls to the calling group
extension because a calling group member active on a call is
considered unavailable for incoming calls. In Hybrid/PBX
mode, it is recommended that calling group members program
SA buttons for Immediate Ring.
Headset Auto Answer does not automatically answer calls
ringing on buttons programmed for No Ring on an MLX
telephone; the user must select the button manually to answer
the call. When Abbreviated Ring is enabled, the user hears the
abbreviated ring if another call rings while the user is on a call.
The ringing patterns for tip/ring devices connected to an MFM
are those of an MLX telephone rather than a single-line
telephone — one ring for inside calls, two rings for outside calls,
and three rings for priority ring or transfer return. Personalized
Ringing patterns cannot be programmed for an MFM.
Centralized telephone programming must be used to program
Ring Timing Options (Immediate Ring, Delay Ring, or No Ring).
When Night Service is turned on, calls received at a Night
Service group member’s telephone ring immediately even if the
line buttons are programmed for Delay Ring or No Ring. When
Night Service is turned off, telephones return to their
programmed Ring Timing Options.
Ringing Options
435