Instruction manual

Features
Telephone Differences
Queued Call Consoles
Ringing Options, Abbreviated Ring, and Personalized Ringing cannot be
programmed on a QCC. The Call buttons are fixed to Immediate Ring. A QCC
receives only two types of distinctive ringing
— one ring for an inside call and
two rings for an outside call.
Other Multiline Telephones
Personalized Ringing can be programmed for an MLC-5 cordless telephone
only through centralized telephone programming.
Ring Timing Options can be programmed for a Multi-Function Module (MFM)
only through centralized telephone programming.
Single-Line Telephones
Neither Abbreviated Ring nor Personalized Ringing can be programmed for
single-line telephones, and Ring Timing Options can be programmed only
through centralized telephone programming.
Single-line telephones connected to an 008 OPT module do not receive
distinctive ringing for the various call types listed in Table 34.
Feature Interactions
Auto Answer All
Automatic Line
Selection
Coverage
An analog multiline telephone user selects the lines to be
answered by the device connected to a General Purpose
Adapter (GPA) by programming each line for Immediate or
Delay Ring. The lines not to be answered are programmed for
No Ring. If the user wants the device to answer only inside
calls, all Personal Lines must be programmed for No Ring.
The system does not automatically select outside line, SA,
ICOM, or Cover buttons programmed for No Ring, even when
Ringing/Idle Line Preference is turned on. The user must select
the button manually to answer a call. (The green LED flashes
when the call arrives; when the user presses the button, the red
LED goes on.)
Primary Cover, Secondary Cover, and Group Cover buttons
can be programmed for Immediate Ring, Delay Ring, or No
Ring.
Calls received on line buttons programmed for No Ring are not
sent to Coverage.
434 Ringing Options