Instruction manual

Features
Remote Access
At a Glance
Users Affected
Telephone users, operators
Reports Affected
Remote Access (DISA) Information
Mode
All
Telephones
Touch-tone only
System Programming
Assign Dedicated or Shared Remote Access to trunks:
● LinesTrunks → RemoteAccss → LinesTrunks
If barrier codes are not used, assign class of restrictions
to trunks:
● LinesTrunks → RemoteAccss → Non-Tie/
Tie Lines → Restriction/ARS Restrct/
AllowList/DisallowList
Assign barrier codes and change class of restriction for
each barrier code:
● LinesTrunks → RemoteAccss → BarrierCode →
Restriction/ARS Restrct/AllowList/
DisallowList
Specify that barrier codes are required for Remote Access:
● LinesTrunks → RemoteAccss → Non-Tie/
Tie Lines → BarrierCode
Add, change, or remove individual barrier codes:
● LinesTrunks → RemoteAccss → BarrierCode
→ Codes
Assign barrier codes to Remote Access system
programming trunks:*
● LinesTrunks → RemoteAccss → BarrierCode →
SProgMaint
Enable or disable Callback for busy pools:
● LinesTrunks → RemoteAccss → AutoQueuing
Specify destination of Remote Access calls to unassigned
numbers:
● Options → More → Unassigned
Change Remote Access code:
● SysRenumber → Single → RemoteAccs
Maximums
16 barrier codes, 4 digits each
Continued on next page
* This program selection is not currently functional.
420 Remote Access