Instruction manual

Features
Barge-In In a Release 2.0 (or later) system, Recall can be used by the
user who has joined a call by using Barge-In, as well as by the
user who was barged into.
In a Release 1.0 or Release 1.1 system, Recall cannot be used
with Barge-In, since Barge-In is used on an SA or ICOM button.
Callback
If Recall is used while the user is off-hook with a queued
Callback request, the call is disconnected and the user hears
dial tone.
Call Waiting
If Recall is used while the user is hearing special ringback, the
call is disconnected and the user hears internal dial tone.
Conference
The Conf button is used to enter the Flash special character,
which simulates pressing the Recall button, in telephone
numbers programmed for Directories, Auto Dial buttons, or
Speed Dial codes.
In Hybrid/PBX and Key modes, a single-line telephone user with
a Recall button can add a participant to a conference call and
connect all participants by using the Recall button. in addition,
the Recall button can be used to drop the most recently added
participant or to drop a busy number.
In Behind Switch mode, the fixed Conference button on an
MLX or analog multiline telephone must be programmed
through system programming to send a timed flash plus the
code expected by the host switch to activate Conference on the
host. If use of the communications system Conference feature
is also desired, it must be programmed on an available line
button on each multiline telephone through extension
programming or centralized telephone programming.
Recall has no effect on a completed conference call.
Coverage
Recall has no effect on a call answered on a Primary Cover,
Secondary Cover, or Group Cover button.
In a Release 2.0 (or later) system, Recall can be used on a
Group Coverage call answered by a member of a Calling
Group. In a Release 1.0 or Release 1.1 system, Recall cannot
be used on a call of this type, since it is answered on an SA or
ICOM button.
Directory The Conf button is used to enter the Flash special character,
which simulates pressing the Recall button, in a directory listing
telephone number.
Forward/
A multiline telephone user who has received a Forward or
Follow Me
Follow Me call can use Recall if the call is an inside call. In a
Release 2.0 (or later) system, Recall can also be used on an
outside call received on a loop-start trunk.
Recall/Timed Flash 413