Instruction manual

Features
Recall/Timed Flash
At a Glance
Users Affected
Telephone users, DLC operators
Reports Affected
Extension Information
System Information
Mode
All
Telephones
All except QCC
Programming Code
Recall
*775
Conference
*772 (Behind Switch mode only)
Drop
*773 (Behind Switch mode only)
Transfer
*774 (Behind Switch mode only)
Feature Code
775
MLX Display Label
Recall [Recll]
System Programming
Change timed flash duration (Recall Timer):
● Options → More → RecallTimer
Program fixed Conference, Drop, and Transfer
buttons to access host features in Behind Switch mode:
● Options → More → BehndSwitch →
Conference/Drop/Transfer
Factory Settings
Recall Timer
450 ms (range 350 ms, 450 ms, 650 ms, 1 sec)
Description
Recall sends a momentary on-hook signal called a timed flash, or switchhook
flash. A timed flash is used as a control signal, as follows:
■ On an inside call, the signal is intercepted by the control unit.
— A multiline telephone user can use Recall to disconnect a call
and get a new dial tone without hanging up. The user can be on
an active call or listening to ringback or dial tone. When the user
is listening to a busy signal, Recall has no effect.
— A single-line telephone user can use Recall to put an active call
on hold and access system features such as Conference and
Transfer.
408 Recall/Timed Flash