Instruction manual

Features
Group Calling
Line Request
Music-on-Hold
Paging
Speed Dial
SMDR
System
Numbering
Trunks assigned to pools can be assigned to ring into a calling
group. An incoming call on a trunk assigned to the pool rings
on an SA button even if the calling group member has a Pool
button assigned to his or her telephone.
Line Request cannot be used for a Pool button.
Trunk jacks used for Music-on-Hold cannot be assigned to trunk
pools.
Trunk jacks used for Loudspeaker Paging cannot be assigned
to trunk pools.
A pool dial-out code can be included with the telephone
number associated with a Personal Speed Dial or System
Speed Dial code. However, pause characters may be required
immediately following the pool-dial-out code, depending on the
local telephone company. A pause character is entered by
pressing the Hold button.
When outgoing calls are made by using a pool, the trunk
selected by the system is reported on the SMDR report.
Pool dial-out codes (the factory-set codes are 70 and 890–899)
can be renumbered.
Pools
345