Instruction manual

Features
Paging
Park
Personal Lines
SMDR
System Access/
Intercom Buttons
Transfer
When the line number used for loudspeaker paging is not
assigned to a button on a multiline telephone, a user can
access the loudspeaker paging system by using Individual
Pickup and dialing the loudspeaker paging port line number
(801-880), or by using a Pickup button specifically
programmed for the paging port line number.
A parked call can be picked up by using Individual Pickup.
If a call received on a Personal Line is transferred to another
user who receives the call on an SA or ICOM button and then
puts the call on hold, another user who shares the Personal Line
cannot select the shared Personal Line button to pick up the
call. If the user who received the transfer and put the call on
hold cannot return to the call, another user must use Line
Pickup to pick up the call (for example, a system operator can
take a message and then disconnect the caller).
The extension of a user who picks up a call by using Pickup is
shown on the SMDR report.
If Pickup is used to answer a call ringing at an SA or
Shared SA button, the call is removed from the ringing
telephone and moves to the SA or Shared SA button used to
pick up the call. The green LED goes on next to the SA button
used to answer the call and all Shared SA buttons
programmed for that specific button.
A transferred call can be answered by using Pickup.
340 Pickup