Instruction manual

Features
Personal Lines
At a Glance
Users Affected
Reports Affected
Mode
Telephones
System Programming
Maximums
Factory Settings
Assigned Personal Lines
Telephone users, operators
Extension Information
All
All except QCC
Assign or remove Personal Lines:
● Extensions → LinesTrunks
Assign or remove principal user of a Personal Line:
● Lines Trunks → More → PrncipalUsr
64 telephones per Personal Line
1 telephone as principal user
2 simultaneous users per Personal Line
Analog DLC: Lines 1-32
Digital DLCs: Lines 1-18
Multiline telephones: Lines 1-8 (Key Mode)
Description
A Personal Line, also called a direct facility termination (DFT) is an outside trunk
assigned to a button on one or more telephones. A Personal Line can provide a
user with either the shared or exclusive use of a specific trunk. In the
Hybrid/PBX mode, a personal line allows users to receive outside calls without
system operator involvement.
When a Personal Line is assigned to more than one telephone, a principal user
of the Personal Line can be assigned via system programming. Assigning the
telephone as the principal user has the following effects:
■ Only the principal user can forward calls received on the Personal Line to
an outside telephone number (if Remote Call Forwarding is enabled for
the extension).
■ Calls received on the Personal Line follow the principal user’s Individual
or Group Coverage patterns unless the Personal Line is set to No Ring.
A Personal Line can be selected to make or receive outside calls by pressing
the associated Personal Line button on a multiline telephone; dial-out codes
are not needed. When the line is in use, the green LED is on at all multiline
telephones that share the Personal Line. Inside calls cannot be made or
received on a Personal Line.
328 Personal Lines