Instruction manual

Features
Forward and
Follow Me
Group Calling
Headset Options
Hold
Line Request
Multi-Function
Module
Music-on-Hold
Pickup
SMDR
System Access/
Intercom Buttons
System
Numbering
Transfer
Returning parked calls are not forwarded.
A calling group member who parks a call is considered
available to receive another call.
If a call is parked, another call can be automatically answered
by using Headset Auto Answer.
If a single-line telephone user with a call on hold hangs up, the
call is disconnected. Park should be used instead of Hold.
When a user or system operator parks a call received on a
Personal Line button and it is picked up using the Pickup
feature at another telephone and put on hold by using the Hold
button, other users who share the Personal Line cannot press
the line button and pick up the call.
A returning parked call cancels Line Request.
A Multi-Function Module (MFM) user cannot park a call but can
pick up a call parked by another user.
If Music-on-Hold is programmed, a parked caller hears Music-
on-Hold.
A parked call can be picked up by using Individual Pickup.
If an incoming call is parked but not picked up by the other
extension, the extension of the user who activated Park is
shown in the STN field of the SMDR record for the call. If an
incoming call is parked and picked up by the destination
extension, the destination extension is shown in the STN field of
the SMDR report.
When a user parks a call made or received on an SA button,
Shared SA buttons do not ring when the parked call returns.
System operator park zones (the factory-set zones are 881-888)
can be renumbered.
A user can also park calls by pressing the Transfer button,
dialing his or her own extension, and pressing the Transfer
button again. DLC system operators can press Transfer and
dial a system operator park zone. When this method is used,
the transfer must be completed by pressing the Transfer button
or by hanging up. This method cannot be used by QCC
operators.
Park
327