Instruction manual

Features
Park
At a Glance
Users Affected
Telephone users, operators
Reports Affected Extension Information
Operator Information
System Information
Mode
All
Telephones
All
Programming Code
Park at own *86
extension
Park Zone
*22 + park zone (DLC operators only)
MLX Display Label
Park at own
Park
extension
Park Zone
Park Zone [PrkZn]
System Programming
Assign return interval before unanswered parked call returns:
● Options → Call ParkRtn
Maximums
No. of Parked Calls 8 (one parked call per zone)
in Park Zones
Factory Settings
Park Zones
881-888
Call Park Return Interval
180 sec (range 30-300 sec, in increments of 10 sec)
QCC Priority Level for
4 (range 1-7)
Returning Parked
Calls
Description
Park allows a user to put a call on a special type of hold so that it can be picked
up from any telephone in the system. A user can park a call and then pick it up
at another telephone, or can use Paging to announce the call so that another
person can pick it up. A parked call is picked up by using the Pickup feature.
Users (excluding QCC operators) can park calls at their own extensions by
activating Park during the call or by pressing the Transfer button, dialing their
own extension numbers, and pressing the Transfer button again to complete
the transfer. At least two SA or ICOM buttons are required, and if a user (such
Park
323