Instruction manual

Features
Headset Options
Hold
Inspect
Microphone
Disable
Multi-Function
Module
Personal Line
Pickup
Pools
Remote Access
Station Message
Detail Recording
System Access/
Intercom Buttons
System
Numbering
Transfer
Voice Announce
to Busy
A user with a headset hears Group Paging over the
speakerphone.
A Speakerphone Paging call can be put on hold by the caller.
An inside voice-announced call can be put on hold by the
person being called.
If the user gets a voice-announced inside call or a Group Page
while using the Inspect feature, the Inspect feature is canceled
and the user is returned to the Home screen.
Calls made to Speakerphone Paging Groups can still be heard
over telephones whose microphones are disabled.
A Multi-Function Module (MFM) should not be a member of a
Speakerphone Paging Group.
A trunk used for Loudspeaker Paging equipment cannot be
assigned as a Personal Line.
When the line number used for Loudspeaker Paging is not
assigned to a button on a multiline telephone, a user can
access the Loudspeaker Paging system with Individual Pickup
by dialing the paging port’s line number (801-880) or by
programming a Pickup button specifically for the paging port
line number.
In the Hybrid/PBX mode, trunk jacks used for loudspeaker
paging cannot be assigned to trunk pools.
Loudspeaker Paging cannot be accessed from outside the
system via either DID lines or Remote Access.
Paging calls are not printed on the SMDR report.
Announcements using Speakerphone Paging can be made
from a Shared SA button. However, users cannot join a page
on a Shared SA button.
Extensions for paging groups can be renumbered. (The
factory-set extensions are 793—799; Page All is 799.)
Calls cannot be transferred to paging groups or to the
Loudspeaker Paging extension.
Users who program their telephones to turn Voice Announce to
Busy (Voice Announce on MLX telephones) off do not receive
Speakerphone Paging.
322
Paging