Instruction manual

Features
Feature Interactions
Automatic Route
Selection
Calling
Restrictions
Display
Forward and
Follow Me
Group Calling
Multi-Function
Module
Pickup
When Night Service with Outward Restriction is programmed,
the user must enter the password before dialing the Automatic
Route Selection (ARS) dial-out code unless the telephone is
assigned to an exclusion list or the number is on an emergency
numbers list.
For Night Service with Outward Restriction, a Night Service
Emergency Numbers List must be created consisting of
emergency numbers that can be dialed from any telephone
without dialing the password. Any restrictions assigned to a
telephone assigned to the exclusion list are in effect when Night
Service is activated.
If the system operator must enter a password to turn Night
Service on and off, the display prompts the operator for the
password. No message is displayed when the system operator
activates Night Service by using a feature code or when Night
Service is off. If an MLX display telephone is in the test mode
and a Night Service call arrives and the user exits the test mode
while the call is still ringing, the call rings at the telephone.
However, the calling information is not displayed. The user
must press the Home button to see the call information.
When an extension is a member of a Night Service group and
Night Service is activated, calls received at the extension are
forwarded to extensions by using Forward and Follow Me but
are not forwarded to outside telephone numbers when Remote
Call Forward is used.
In Release 2.0 and later, a Calling Group can be a Night
Service group member.
An MFM can be a member of a Night Service group. An
external alert connected to the MFM in the SAA operation, when
assigned to a Night Service group, can be used for
supplemental ringing for after-hours calls.
A call ringing at a Night Service group telephone can be
answered from another telephone by using Pickup.
312
Night Service