Instruction manual

Features
Mode Differences
Hybrid/PBX Mode
Key and
When Ringing/Idle Line Preference is turned on and Automatic Line Selection is
set to select an SA button, an outside line can be selected by dialing the pool
dial-out or Automatic Route Selection code.
Behind Switch Modes
When Ringing/Idle Line Preference is turned on and Automatic Line Selection is
set to select an ICOM button, an outside line can be selected by dialing the Idle
Line Access code (usually 9).
Telephone Differences
Direct-Line Consoles
An MFM in a Direct-Line Console (DLC) is not an operator. It serves only as
another extension without the characteristics of the operator extension.
Queued Call Consoles
An MFM cannot be connected to a Queued Call Console (QCC).
Other Multiline Telephones
An MFM can be installed only in MLX telephones and cannot be used with
analog multiline telephones.
Single-Line Telephones
A single-line telephone or other type of tip/ring device up to 1000 feet away can
be connected to the MFM and used to make and receive inside and outside
calls.
A single-line telephone connected to an MFM cannot use the Conference, Hold,
or Transfer features.
300
Multi-Function Module