Instruction manual

Features
■ The Automatic Line Selection sequence should be set to the following:
— SA Ring or ICOM Ring
— SA Originate Only or ICOM Originate Only
— In Key and Behind Switch modes: outside lines that make calls
from the MFM device.
— In Behind Switch mode only: the Prime Line.
When the ALS sequence is set to select an SA or ICOM button, an
outside line can be selected by dialing the Idle Line Access code
(usually 9) in Key and Behind Switch modes, or by dialing the pool dial-
out or Automatic Route Selection code in Hybrid/PBX mode. If ALS is set
to select an outside line button before an SA or ICOM button, the device
cannot be used to make inside calls (inside calls can be received only).
■ Ring Timing options should be set to No Ring for each outside line on
which calls will not be received.
■ When the device is used only on Personal Lines for supplementary
answering (such as an answering machine) or ringing (such as an
external alert) and trunks are assigned to or removed from the
associated MLX telephone, the trunks should also be assigned to or
removed from the MFM.
■ When the device is used for both inside and outside calls to supplement
ringing (external alert) or to answer or screen calls (answering machine),
calls can be redirected to the device by assigning a Primary Cover,
Secondary Cover, Group Cover, or Shared SA button. In addition, the
MLX telephone user can activate Forward and Follow Me to redirect
incoming calls to the device. However, Coverage and Forward and
Follow Me should not be used simultaneously.
Additionally, the following features cannot be used:
■ Personal Speed Dial
■ System Speed Dial
■ Account Code Entry
■ Pickup (individual and group)
■ Reminder Service
■ Log in and out of calling group
NOTE:
Forward and Follow Me (including Remote Call Forward) and Privacy
are not recommended because the user does not have an LED that
indicates when the feature is active.
298 Multi-Function Module