Instruction manual

Features
Single-Line Telephones
To redial a number using Last Number Dial, the single-line telephone user lifts
the handset and then, while listening to inside dial tone, dials #84. The number
that was last dialed is dialed automatically.
Feature Interactions
Auto Dial
Directory
Direct Station
Selector
Display
Inspect
Microphone
Disable
Speed Dial
Last Number Dial does not store numbers dialed using an
inside Auto Dial button. If a number containing special
characters is dialed using an outside Auto Dial button, the
special characters do not work when the number is redialed
using Last Number Dial.
Last Number Dial does not store a number dialed using a
Personal, Extension, or System Directory.
An extension number dialed by pressing a DSS button is not
stored for Last Number Dial.
When a user presses a programmed Last Number Dial button,
the digits appear on the display as if the user were dialing them
from the dialpad.
In Release 1.0 and 1.1, when a user presses Inspct and then a
programmed Last Number Dial button, Last Number Dial
appears on the display.
In Release 2.0, when a user presses Inspct and then a
programmed Last Number Dial button, the saved number
appears on the display.
When an MLX telephone user’s microphone is disabled,
pressing a Last Number Dial button before lifting the handset
turns on the speakerphone so the user can hear the number
being dialed. However, the user must lift the handset to talk
once the call is answered.
Telephone numbers dialed using Personal Speed Dial are
stored by Last Number Dial. If the number includes special
characters such as Pause or Stop, the special characters do
not work when the number is redialed using Last Number Dial.
Telephone numbers dialed using System Speed Dial are not
stored by Last Number Dial.
Last Number Dial 277