Instruction manual

Features
Group Calling
Labeling
Night Service
Ringing Options
System
Numbering
Transfer
AUDIX Voice Power services and the FAX Response service are set up
as members of dedicated Calling Groups. Integrated Administration
sets up the necessary Calling Groups with the applicable options for
correct operation of these services.
Names entered on the Extension Directory screen are sent to the switch
and appear on system programming Labeling screens on the
programming console or SPM. Names entered on the console or SPM
appear on the Extension Directory screen after Extension Directory
Setup is completed. Labels are added to lines and Calling Groups, as
appropriate, when services are selected through Integrated
Administration.
The Automated Attendant service can be used for Night Service
operation. The necessary system programming options can be set
through Integrated Administration.
The total of the values programmed for Delay Ring plus Coverage Delay
Interval should be less than either the Transfer Return Time or the VMS
Transfer Return Interval. (These values are shown on the Application
Switch Defaults screen.)
System renumbering can be done only through system programming on
the programming console or SPM. Integrated Administration never
sends system numbering information to the switch.
Both the Transfer Return Time and the VMS Transfer Return Interval
should be greater than the total of the values programmed for Delay
Ring plus the Coverage Delay Interval. (These values are shown on the
Application Switch Defaults screen.)
Integrated Administration
265