Instruction manual

Features
■ Add Auto Dial button for Automated Attendant Calling Group (770).
■ Add private fax extension(s) to or delete from AUDIX Voice Power
Coverage Group.
Screen Results
When the user finishes with the AUDIX Voice Power User or AUDIX Voice
Power/FAX Attendant User screen and presses [F3] (Save), the Subscriber
screen appears for AUDIX Voice Power or for AUDIX Voice Power/FAX
Attendant. The Subscriber screens are for programming application
parameters and do not send any information to the switch.
The user can also access the Subscriber screens by selecting Subscriber
Administration from the AUDIX Voice Power or AUDIX Voice Power/FAX
Attendant menu under the Integrated Solution III or Integrated Solution
Maintenance menu. That method of access allows information to be changed
about an existing subscriber, but does not allow the addition of a new
subscriber.
System Programming/Switch Admin
On initial installation of IS-III, the selection system Programming/Switch
Admin from the AUDIX Voice Power or AUDIX Voice Power/FAX Attendant
menu brings up the System Programming/Switch Admin Form screen. Figure
17 shows this screen, and a description of its use follows.
On subsequent access, the selection System
Programming/Switch Admin
brings up the System Programming/Switch Admin Menu screen. Figure 18
shows this menu, both as it appears with only AUDIX Voice Power installed and
as it appears with both AUDIX Voice Power and FAX Attendant installed.
Note that one of the selections on the System Programming/Switch Admin Menu
screen (Figure 18) is System Programming/Switch Admin Form, which
brings up the System Programming/Switch Admin Form screen (Figure 17).
Integrated Administration
249