Instruction manual

Features
Application Switch Defaults
AUDIX Voice Power Switch Defaults
Automated Attendant - Calling Group:
770
Call Answer - Calling Group:
7926
Information Service - Calling Group:
7927
Message Drop - Calling Group:
7928
Voice Mail - Calling Group:
7925
Coverage Group:
30
AVP Default
Current Switch
Reliable Disconnect:
[yes/no]
no
Delay Ring: 2
2
Coverage Delay Ring: 3 3
VMS Transfer Return Interval: 6 4
Transfer Return Time:
6
4
Application Switch Defaults
AUDIX Voice Power/FAX Attendant Switch Defaults
Automated Attendant
Call Answer
FAX Response
Information Service
Message Drop
Voice Mail
- Calling Group:
770
- Calling Group:
7926
- Calling Group:
7924
- Calling Group:
7927
– Calling Group:
7928
– Calling Group: 7925
Coverage Group: 30
AVP Default
Reliable Disconnect:
yes
Delay Ring: 2
Coverage Delay Ring: 3
VMS Transfer Return Interval:
6
Transfer Return Time:
6
Current Switch
no
2
3
4
4
Figure 14. Application Switch Default Screens
The values shown in the screens in Figure 14 are the defaults for all information
on the Application Switch Defaults screen. When the user accesses the screen,
the current programmed values are shown.
The settings in the Current Switch column for Reliable Disconnect, Delay
Ring, Coverage Delay Ring, VMS Transfer Return Interval, and Transfer Return
Time are displayed for comparison purposes, and cannot be changed on this
screen. The values in the AVP Default column can be changed, and are sent
to the switch when the user presses [F3]
(Save). A difference between the two
242
Integrated Administration