Instruction manual

Features
Table 22. – Continued
Label Key
Action
Delete
Display
Frm–Mgmt
Help
NextPage
Next-Rec
PrevPage
Prev-Rec
Save
[F2]
[F1] or [F4]
[F7]
[F1]
[F5]
[F5]
[F4]
[F4]
[F3]
Display a pop-up form for deleting information, such as
deleting lines and pools from the Calling Group for a
service.
Display information about the record on the current
screen, such as the label associated with an extension.
(Frame Management) Display options for managing the
screen, such as refresh and resize.
Display help for the current screen. (Help is available
for every Integrated Administration screen.)
On a multiple-page screen, go to the next page.
Display the next record, such as the next extension, on
the current screen.
On a multiple-page screen, return to the previous page.
Display the previous record, such as the previous
extension, on the current screen.
Validate and save the information on the current screen,
updating the application database and/or the switch as
appropriate.
NOTE:
In the “Switch Programming Results” sections that follow, any information
that is sent to the switch is sent after the user presses [F3]
(Save). This
information replaces existing switch programming of the items sent.
Application Switch Defaults
The qualified technician accesses the Application Switch Defaults screen from
the Technician Maintenance menu. Figure 14 shows this screen, both as it
appears with only AUDIX Voice Power installed and as it appears with both
AUDIX Voice Power and FAX Attendant installed. A description of its use
follows.
Integrated Administration 241