Instruction manual

Features
The switch and the applications share the following information:
■ System numbering of extensions, trunks, and pools
■ System labeling
— the user or other name associated with each
extension, trunk, and pool
■ The Coverage Group that sends its calls to the applications
■ The Calling Group set up for each service of the applications
■ The Reliable Disconnect setting for loop-start trunks
■ The Delay Ring and Coverage Delay Interval settings
■ The Transfer Return Time and VMS Transfer Return Interval
Integrated Administration consists chiefly of three related functions accessed
from the Integrated Solution III menu (for users) or the Integrated Solution
Maintenance menu (for qualified technicians only):
Extension Directory
Setup
Extension Directory
System Programming/
Switch Admin
(on the Technician Maintenance menu, for qualified
technicians only) is used during installation to read all
switch extensions and extension labels into the
database of extensions used by the applications.
allows the technician or system manager to add,
change, or delete extensions, change extension
labels, and add or delete subscribers to AUDIX Voice
Power or AUDIX Voice Power/FAX Attendant.
accessed through the AUDIX Voice Power or AUDIX
Voice Power/FAX Attendant menu, allows the
technician or system manager to program common
information used by the switch and the applications.
Through this selection, the user configures call
handling by Automated Attendant and adds or
deletes trunks and pools for Call Answer, FAX
Response, Information Service, Message Drop, and
Voice Mail.
Integrated Administration
235