Instruction manual

Features
Integrated Administration
At a Glance
Users Affected
Reports Affected
Mode
Telephones
Factory Settings
Automated Attendant Calling Group
Call Answer Calling Group
FAX Response Calling Group
Information Service Calling Group
Message Drop Calling Group
Voice Mail Calling Group
Coverage Group
Reliable Disconnect
Delay Ring
Coverage Delay Ring
VMS Transfer Return Interval
Transfer Return Time
System manager, installer
Direct Group Calling Information
Group Coverage Information
GS/LS Trunk Information
System Information
Key and Hybrid/PBX
All
770
7926
7924
7927
7928
7925
30 (range 1-30)
yes
2 rings (range 1-6 rings)
3 rings (range 1-9 rings)
6 rings (range 0-9 rings)
6 rings (range 0-9 rings)
NOTE:
Integrated Administration is available with Release 2.0 (or later) systems.
Description
The Integrated Administration capability of Integrated Solution III (IS-III)
simplifies the programming of common information for the communications
system (the “switch”), AUDIX Voice Power, and, if it is also installed, AT&T FAX
Attendant System™. Since the AUDIX Voice Power and FAX Attendant
applications use some of the same information programmed on the switch,
Integrated Administration lets the installer or system manager make changes or
additions to this information just once, instead of on both sides of the
connection. Using Integrated Administration reduces programming time and
effort and ensures that the switch and the applications are in agreement.
234
Integrated Administration