Instruction manual

Features
Feature Interactions
Alarm (Operator) Inspect can be used on an MLX DLC or a Queued Call Console
(QCC) to display the number of alarms.
Conference If the user presses the Conference button while Inspect is
activated, Inspect is canceled and the system tries to activate
the Conference feature.
Direct Station Inspect can be used to display limited information, such as
Selector extension number and label and number of messages, for each
DSS button. To use Inspect, the system operator presses the
Page button for the range of extensions, then the Inspect
button, then the individual DSS button for an extension. Inspect
must be activated separately for each page on the DSS — to
inspect another page of extensions, the operator must press the
Home button and repeat the process.
When the operator inspects a DSS button associated with an
extension, Line 1 of the display shows the extension, the label
associated with the extension, if any, and the number of
messages that have been left for that extension, if any. If the
extension has posted a message, Line 2 shows the Posted
Message.
In a Release 2.0 (or later) system, the operator can inspect a
DSS button whose red LED is on to see whether the extension
is busy or using Do Not Disturb. If the user at the extension has
turned on Do Not Disturb, the Do Not Disturb message is also
posted and appears on the operator’s display. (However, the
message may also mean that the user has posted the message
without turning on the Do Not Disturb feature.)
Drop If the user presses the Drop button while active on a call with
Inspect activated, Inspect is canceled and the system attempts
to activate the Drop feature.
Group Calling Any MLX telephone user can inspect the number of calls in the
calling group queue by pressing the Inspect button and then
pressing a button programmed with the calling group’s
extension (In-Queue Alarm button). The display shows the
label associated with the calling group and the number of calls
in queue.
Hold
If the user presses the Hold button while active on a call with
Inspect activated, Inspect is canceled and the system tries to
put the call on hold.
232
Inspect