Instruction manual

Features
At a Glance (continued)
System Programming
Assign Calling Group members and Calling Group supervisors
to each Calling Group:
● Extensions → More → Grp Calling → Members
Assign lines/trunks to ring into Calling Group:
● Extensions → More → Grp Calling → Line/Pool
Select hunt type—circular or linear:
● Extensions → More → Grp Calling → Hunt Type
Designate delay announcement device:
● Extensions → More → Grp Calling → DelayAnnce
Assign Calling Group as receiver for a Group Coverage sender
group:
● Extensions → More → Grp Calling → GrpCoverage
Assign Message Waiting Receiver for Calling Group:
● Extensions → More → Grp Calling → Message
Set Overflow Threshold and designate Calling Group or QCC
queue as Overflow Receiver:
● Extensions → More → Grp Calling → Overflow
Change Calling Group Type to determine if Calling Group
members are automatically logged in after a system restart.
When Calling Group is used for voice messaging
systems, specify whether VMI type is integrated or generic:
● Extensions → More → Grp Calling → Group Type
Change Calls-In-Queue Alarm Threshold:
● Extensions → More → Grp Calling → Queue Alarm
Assign external alert to notify Calling Group members of
Calls-In-Queue Alarm:
● Extensions → More → Grp Calling → Xtnl Alert
Enter display label for Calling Group:
● More → Labeling → Grp Calling
Maximums
Calling Groups
32
Telephones per group 20
Calling Groups per
telephone
1
Calling Groups per
trunk
1
Delay announcement
devices per system
32 (one per group, can be shared among groups)
Message Waiting
Receivers per
Calling Group
1 (can be shared among groups)
Continued on next page
Group Calling 199