Instruction manual

Features
Paging
Posted Message
Reminder Service
Signaling
System Access/
Intercom Buttons
Transfer
Voice Announce
to Busy
Speakerphone Paging calls cannot be made to a telephone with
Do Not Disturb turned on.
In a Release 2.0 (or later) system, when Do Not Disturb is
turned on, the system automatically posts the Do Not
Disturb message. This message appears on the Home
screen of an MLX display telephone user with Do Not Displayed
turned on, and on the screen of any inside caller with a display
telephone who calls that user. The system automatically
unposts the Do Not Disturb message when the user turns
off the feature.
Users with analog multiline or MLX-10 non-display telephones
must program a Posted Message button for the system to
automatically post or unpost the message when the feature is
turned on or off. A user can post or unpost a Do Not
Disturb message by pressing a programmed Posted
Message button. However, this does not turn on or off the Do
Not Disturb feature.
Reminder Service calls ring at telephones with Do Not Disturb
turned on.
Signaling cannot be used when the destination telephone user
turns on Do Not Disturb.
Do Not Disturb prevents ringing of incoming calls at SA or
ICOM buttons (including Shared SA buttons) on the telephone
where the feature is turned on. This also prevents calls
received on the principal’s SA buttons from ringing at other
telephones with Shared SA buttons for that extension.
Calls transferred to telephones that have Do Not Disturb turned
on are returned after the Transfer Return Interval expires unless
the telephone has Coverage and a receiver is available. In that
case, the transferred call is sent to the receivers like any other
call.
A user with Do Not Disturb active does not receive voice-
announced calls.
178
Do Not Disturb