Instruction manual

Features
Feature
Description
Programming
If the user presses a button that is
(continued)
already programmed, the name of
the feature appears on the display.
Recall
If the button is not programmed,
the display shows that the button is
blank.
Any digits dialed during
programming appear on the
display on an analog multiline
telephone.
Status feedback messages are
shown on analog multiline
telephones when features that
affect telephone operation are
programmed. Status messages
are not shown on MLX telephones.
(For more on extension
programming, see Appendix C.)
When an MLX telephone user
presses a programmed Recall
button while on an outside line, the
line information is re-displayed just
as if the user had gone off-hook on
the line.
Reminder Service When Reminder Service is
activated, either the previously set
time or an indication that no time
has been set is displayed.
If the user enters a new time, the
display changes with the first digit.
When the time is set, a confirmation
is displayed.
When a reminder call alerts a
station, the display indicates a
reminder call.
When a station cancels a reminder,
a confirmation is displayed.
Sample Displays
Analog Multiline
MLX
Camp On
Camp On
Blank
Blank
5551234
No display
Voice announce
No display
On/Off
Call Waiting
On/Off
Automat ic
Callback On/Off
Shared SA Ring
On/Off
Abbreviated
Ring On/Off
Coverage Inside
On/Off
No display
FX-NYC
7103: 9:15a
7103:
9:15a
7103: No Rmdr Set 7103: No Reminder
Set
Time:
12:30p Time: 12:30p
7103: 12:30p
7103: 12:30p
Rmdr Call Reminder Call
Rmdr Off at 7103 Reminder Off: Miguel
172 Display