Instruction manual

Features
Feature
Description
Conference
As with any other call, the dialed
digits appear on Line 1 of the
display as a user sets up a
conference call.
Coverage
On MLX telephones, Line 1 shows
the number of conference
participants.
In a Release 1.1 (or later) system
operating in Hybrid/PBX mode, an
SA button is selected automatically
(if one is available) when the user
initiates a conference call. In Key
or Behind Switch mode,
Conference operation is the same
as in a Release 1.0 system: the
user must select a line button.
If an SA button is not selected
automatically, the MLX telephone
user is prompted to select a line.
After a line is selected (by the
system or the user), the MLX
telephone display prompts the user
to dial the next participant.
The display also prompts the user
to drop a conference participant
after the Drop button is pressed
and then shows the updated
conference information on Line 1
and the dropped line or extension
on Line 2.
When a call is sent to Coverage,
the person who answers the call
sees a message on the display
indicating who the call was
intended for and the reason the call
was sent to Coverage:
All Telephones:
No Answer
Busy
Do Not Disturb active
MLX telephones
(additional reasons):
Invalid/unknown DID number
Invalid/unknown Remote Access
Sample Displays
Analog Multiline MLX
1234
1234
No display
Conference: 4
No display
Select a Line
No display
Dial, then Press Conf
No display
Drop:
Select Party
Conference: 3
Maria Dropped
Cov No A Juan Cover Juan No Ans
Cov Bsy Juan Cover Juan Busy
Cov DND Juan
Cover Juan DND
No display
DID#?
No display
DISA#?
number
Display 163