Instruction manual

Features
NOTE:
■
Pickup Group appears on the display only if the telephone is part
of a Pickup Group.
■ Barge-In appears only on system operator consoles.
■ Loudspeaker Page appears only if a loudspeaker paging system
has been programmed.
■ Last Number Dial and Park do not appear on a QCC.
■ Camp–on can be used only to complete a transfer to an inside
extension.
Inspect Screens
The Inspect screen, illustrated in Figure 12 and Figure 13, appears when the
user presses the Inspect button and then presses a line button. Two kinds of
information can appear:
■ If the button is associated with a call, calling information is displayed. If
the user is already on a call and another call arrives, pressing Inspect
and the line button with the new call displays information about that call
without interrupting the first call.
■ If the button is not associated with a call, the line or feature programmed
on the button is displayed, with the exception of Last Number Dial and
Saved Number Dial:
— In a Release 2.0 (or later) system, inspecting a programmed
Last Number Dial or Saved Number Dial button displays the
number stored on the button (if the button has been used).
— In a Release 1.0 or Release 1.1 system (and in a Release 2.0
system if the button has not yet been used to store a number),
the Inspect screen shows the name of the feature on these
buttons.
To exit from the Inspect screen, the user must press the Home, Feature, or
Menu button.
Figure 12. 2-Line Display Inspect Screen for Programmed Button
Display
159