Instruction manual

Features
Extension Status Operation (Hotel Configuration)
When Extension Status is in the Hotel configuration, the Extension Status feature
is assigned to, and removed from, individual DLCs via system programming.
(See Extension Status for details.) The hotel Extension Status operation is
always active unless the system operator presses the Message Status button
to use the Auto Dial or DSS buttons to see message-waiting status for each
telephone. The effect of pressing a DSS button while in the hotel Extension
Status operation is the same as that described for normal call-handling
operations earlier in this section.
The red LED next to each DSS button for a room extension is used to monitor
room availability, and the DSS button is used to restrict the telephones when
the rooms are not occupied.
The meaning of the red LED next to the DSS button for each room is shown in
Table 12.
Table 12. LED Meanings for Hotel Extension Status Operation without
Message Status Active
LED Extension
Status Status
Meaning
Off
On
Slow
flashing
0
The room is occupied and the telephone is in
regular call-handling state,
2 The room is vacant and available for occupancy,
and outside calls cannot be made from the
telephone.
1 The room is vacant and ready for cleaning. Outside
calls cannot be made from the telephone.
NOTE:
The LED next to the DSS button for all other types of extensions is always
off and has no meaning.
138 Direct Station Selector—MLX