Instruction manual

Features
Calling Group or CMS Supervisory Operation
A supervisor with a DLC switches from normal call handling to supervisory
operation by pressing the Feature button, dialing 32, and pressing the Hold
button. The effect of pressing a DSS button while in supervisor operation is the
same as that described for normal call-handling operation. See Group Calling
for additional information.
When the supervisory position is not in Message Status operation (the green
LED next to the Message Status button is off), the red LED next to each DSS
button for a Calling Group member’s extension is used to monitor the availability
of members to take calls directed to the Calling Group. The meaning of the red
LED associated with each group member is shown in Table 11.
Table 11. LED Meanings for Supervisor Operation without Message Status
Active
LED Extension
Status Status
Meaning
Off
0
The telephone is signed out from the group and the
member is unavailable to take calls.
On 2
The telephone is signed into the group and calls
can be sent to the member.
Slow 1
Used for CMS only—the telephone is in the After
flashing
Call Work state and the group member is not
available to take calls.
NOTE:
The LEDs next to DSS buttons for all other types of extensions are always
off and have no meaning.
Direct Station Selector—MLX
137