Instruction manual

Features
Table 9. Results of Pressing DSS Button While Active on a Call: QCC
Position
Extension Type
Result
User or Calling Group
The caller is put on hold, the transfer is initiated,
and the extension is dialed automatically. If
extended call completion is programmed with the
manual option, the operator must press the
Release button or hang up to complete the
transfer. If extended call completion is
programmed with the automatic option, the transfer
is completed automatically.
Pool dial-out code or
The caller is put on hold, the transfer is initiated,
ARS code
and the pool dial-out or ARS code is dialed
automatically. The operator can then dial the
telephone number. Transfer completion is always
manual
— the operator must press the Release
button or hang up to complete the transfer,
regardless of whether extended call completion is
programmed with either the manual or automatic
option.
The caller is put on hold, a Call button is
automatically selected, and the Paging Group
extension number is automatically dialed. The call
transfer process is not automatically initiated since
calls cannot be transferred to a Paging Group.
Paging Group
Park Zone The Park feature is activated and the call is put on
hold in the selected Park Zone to allow Pickup from
any extension in the system.
Line/trunk number, Ignored, no effect.
Listed Directory
Number, unassigned
extension numbers,
“Dial 0” calls
134 Direct Station Selector—MLX