Instruction manual

Features
Table 8. Results of Pressing DSS Button While Active on a Call: DLC
Position with One-Touch Transfer
Extension Type Result
User or Calling Group
The caller is put on hold, Transfer is initiated, an SA
or ICOM button is selected automatically, and the
extension number is dialed automatically. If manual
completion is programmed, the system operator
must press another button or hang up to complete
the transfer. If automatic completion is
programmed, the transfer is completed
automatically.
Pool dial-out code or The caller is put on hold, Transfer is initiated, the
ARS code pool dial-out code is automatically dialed, and the
system operator can then dial the outside telephone
number. Transfer completion is always manual—
the system operator must press another button or
hang up to complete the transfer, regardless of
whether the system is programmed for manual or
automatic completion.
Paging Group
The caller is put on hold, an SA or ICOM button is
selected automatically, and the Paging Group
extension number is dialed automatically. Transfer
is not completed automatically, regardless of
whether the system is programmed for One-Touch
Hold or One-Touch Transfer, since calls cannot be
transferred to a Paging Group.
Call Park Zone
The Park feature is activated and the call is put on
hold on the selected Park Zone to allow Pickup from
any extension in the system.
Line/trunk number,
Ignored, no effect.
Listed Directory
Number, unassigned
extension numbers,
“Dial 0” calls
Direct Station Selector—MLX
133