Instruction manual

Features
Table 7. Results of Pressing DSS Button While Active on a Call: DLC
Position with One-Touch Hold
Extension Type Result
User, Calling Group,
Paging Group.
Pool dial-out code, ARS
code
Park Zone
Line/trunk number,
Listed Directory
Number, unassigned
extension numbers,
“Dial 0” calls
An outside caller is put on hold, an SA or ICOM
button is selected automatically, and the extension
number is dialed automatically. Transfer is not
completed automatically.
An inside call is not put on hold and Transfer is not
activated automatically. If the DSS button is for a
user, a beep is sent to that user. If the DSS button
is for a Calling Group or Paging Group, pressing the
button has no effect.
The caller is put on hold, Transfer is initiated, the
pool dial-out code or ARS code is automatically
dialed, and the system operator can then dial the
outside telephone number. Transfer completion is
always manual—the system operator must press
another button or hang up to complete the transfer.
The Park feature is activated, and the call is put on
hold on the selected Park Zone to allow Pickup from
any extension in the system.
Ignored, no effect.
132 Direct Station Selector—MLX