Instruction manual

Features
Direct Station Selector—MLX
At a Glance
Users Affected
Reports Affected
Mode
Telephones
System Programming
Maximums
Factory Settings
Page 1 button
Page 2 button
Page 3 button
Operators
Operator Information
All
MLX-20L, MLX-28D telephones
Assign extension numbers selected when
DSS buttons are pressed:
● SysRenumber → Single → More →
DSS Button
16 DSSs per system
2 DSSs per console (1 per console if 3 or more
consoles in one carrier)
150 extension numbers per DSS (3 pages of extension
numbers, 50 extension numbers per page)
starts with extension 0
starts with extension 50
starts with extension 100
Description
One or two Direct Station Selectors (DSSs) can be connected to an MLX-20L or
MLX-28D telephone assigned as a system operator position. The DSS
enhances the call-handling capabilities of a system operator with a Direct-Line
Console (DLC) or a Queued Call Console (QCC). When connected to an
MLX-20L telephone used as a system programming console, the DSS facilitates
system programming and centralized telephone programming procedures.
When used with the Extension Status feature or by the Calling Group or Call
Management System (CMS) supervisor, the DSS allows the user to determine, at
a glance, Calling Group or CMS group member status or room status.
The DSS provides the following call-handling capabilities or information:
■
one-touch dialing of inside extensions
■ one-touch transfer
■ one-touch hold (DLC only)
128 Direct Station Selector—MLX