Instruction manual

Features
Auto Dial
Calling
Restrictions
Call Waiting and
Camp-On
Coverage
Directories
Disallowed Lists
Do Not Disturb
Extension Status
Forward and
Follow Me
An inside Auto Dial button can be programmed on a DLC. The
DLC operator can use the button to transfer a call, make an
internal call, or determine whether or not the extension is
available.
Calling Restrictions can be assigned to DLCs. Since
restrictions apply to the telephone used to initiate a call transfer
to an outside number, a user with a restricted telephone can
circumvent restrictions by asking a system DLC operator with
an unrestricted console to connect an outside call.
When the DLC operator uses Camp-On to transfer a call to a
busy extension, the call is placed in the Call Waiting queue and
the caller hears the Call Waiting tone whether or not the
extension has the Call Waiting feature activated. If the system
is programmed for One-Touch Transfer with Automatic
Completion, the system operator uses Camp-On by pressing
the Transfer button, dialing the extension manually, activating
Camp-On, hanging up, and pressing another line button or the
Transfer button again. If the system operator presses an Auto
Dial or DSS button, the transfer is automatically completed and
Camp-On cannot be used.
A DLC can be both an Individual or Group Coverage receiver
and a member of a Coverage Group. No more than eight
Primary Cover, Secondary Cover, or Group Cover buttons
can be assigned on a DLC.
A system operator with a digital DLC can use all the Directory
features.
Disallowed Lists can be assigned to DLCs.
The green LED next to an Auto Dial or DSS button on a DLC
turns on when a user activates Do Not Disturb. In a Release 2.0
(or later) system, the operator can inspect a DSS button whose
red LED is on to see whether the extension is busy or using Do
Not Disturb. If the user at the extension has turned on Do Not
Disturb, the Do Not Disturb message is also posted and
appears on the operator’s display. (However, the message may
also mean that the user has posted the message without turning
on the Do Not Disturb feature.)
Extension Status capability can be assigned to DLCs only. In
the hotel configuration, only a DLC system operator can change
an extension to status 0. In the Group Calling/CMS
configuration, a Calling Group or CMS supervisor uses a DLC to
monitor and change group member status.
A DLC operator can forward calls to extensions and, if the
capability is assigned in system programming, to outside
telephone numbers. Since outside lines are assigned as
Personal Line buttons on the console, the capability to forward
Direct-Line Console
125