Instruction manual
Features
Cover button can be programmed with Ring Timing options: Immediate Ring,
Delay Ring, or No Ring.
Regardless of how these options are programmed, the green LED next to the
Cover button on the receiver’s telephone flashes immediately when a call
begins ringing at the sender’s telephone, The receiver’s telephone rings as
shown in Table 4. Both telephones continue to ring (as programmed) and the
green LED on both telephones continues to flash until the call is answered,
either by the sender or by the receiver (or the caller hangs up).
Table 4. Ringing on Individual Coverage {Receiver) Buttons
Ring Timing Option
Primary Cover
Secondary Cover
on Cover Button
Button Rings...
Button Rings...
Immediate Ring
Immediately
After sender’s telephone
rings 2 times (SC)
Delay Ring
After sender’s telephone After sender’s telephone
rings 1–6 (DR) times rings 2 times (SC)
+ 1-6 (DR) times
No Ring
Does not ring
Does not ring
DR
= Delay Ring Interval
SC
= Secondary Coverage Delay Interval
Group Coverage
Up to 30 Coverage Groups can be programmed for the system. Group
Coverage is an arrangement in which senders are organized into groups and
calls received by any unavailable group member are sent to one or more
receivers. There is no limit to the number of members in a group, but a given
extension can be a member of only one group. Any telephone except a QCC
can be a member of a Coverage Group.
Three types of Group Coverage receivers can be assigned:
■ A multiline telephone can have a Group Cover button for a specific
Coverage Group, assigned either through extension programming or
centralized telephone programming. A given Coverage Group can send
its calls to up to eight Group Cover buttons; all eight can be
programmed on one multiline telephone or can be distributed among up
to eight telephones.
Each Group Cover button can be programmed for Immediate Ring,
Delay Ring, or No Ring.
A single-line telephone cannot be programmed individually as a Group
Coverage receiver. However, it can be a member of a Calling Group that
is a receiver. Group Cover buttons cannot be programmed on a QCC.
106
Coverage