Instruction manual

Features
Table 3. Timers Affecting Coverage
Timer
Coverage
Delay Interval
Ring Timing
Options:
Immediate
Delay Ring
No Ring
Secondary
Coverage
Delay Interval
Retry Timing
Interval
Factory
Setting Range
3 rings
—
2 rings
—
2 rings
5 sec
1-9 rings
—
1-6 rings
—
fixed
fixed
Description
Delay before sending calls to Group Coverage, when:
■ Sender also has Individual Coverage and receiver
is available
■ Sender does not have Individual Coverage or
receiver is not available, and Group Coverage
receiver is Calling Group only or QCC queue only
(no Group Cover buttons on multiline telephones)
Programmable on any line button, including
Cover buttons on multiline telephones
■ Programmable on any line button, including
Cover buttons on multiline telephones
■ Delay before sending calls to Group Coverage
(in addition to Coverage Delay Interval), when
sender also has Individual Coverage and receiver
is available
■ Programmable on any line button, including
Cover buttons on multiline telephones
■ On sender telephone, prevents calls from
going to Coverage
Delay before sending Individual Coverage calls to
Secondary Cover buttons, when sender also has
Primary Individual Coverage
Repetition interval for trying to send calls to Group
Coverage when no receiver is available; continues
until call is answered by sender or receiver (or caller
hangs up)
Individual Coverage
An Individual Coverage receiver has a button programmed on his or her
multiline telephone that corresponds to another extension. A given sender can
have up to eight Individual Coverage receivers. A receiver can have separate
buttons for up to eight senders, but can have only one button to provide
Individual Coverage for a given sender.
A button for Individual Coverage can be programmed as either Primary Cover
or Secondary Cover. The Secondary option provides a two-ring delay (the
Secondary Coverage Delay Interval) to allow the sender to answer before the
receiver; the Primary option does not provide this delay. In addition, each
Coverage
105