Instruction manual

Features
Signaling
Speed Dial
SMDR
System Access/
Intercom Button
Transfer
signaling can be used during a conference.
Press the Conference button to enter the Flash special
character in a Personal Speed Dial or System Speed Dial
telephone number. Press the Drop button to enter the Stop
special character.
When a conference call includes inside and outside
participants, records are generated only for outside
participants. When a call is dropped from a conference call, it
is considered a completed call and is sent to the SMDR print
queue.
Calls on SA and ICOM buttons (including Shared SA buttons)
can be included in a conference call. If a user involved in a
conference call on an SA or ICOM button also has a Shared
SA button for one of the conference participants, the call is
active at the SA or ICOM button and not at the Shared SA
button for the other participant.
A conference call with three or more participants (including the
conference originator) cannot be transferred. However, if the
conference originator has one person on hold for the
conference (the originator pressed the Conference button after
reaching the first person) and after dialing the number for the
next participant decides to transfer the call, the originator can
press the Transfer button to transfer the call instead of
conferencing it.
Conference
101