Instruction manual

Features
Group Calling
Headset Options
Hold
Inspect
Multi-Function
Module
Music-on-Hold
Paging
Park
Pickup
Recall
Calls waiting in the calling group queue or ringing at a calling
group member’s extension cannot be added to a conference
call. A user must be connected to a calling group member
before the call can be added to the conference.
Headset Auto Answer is disabled and must be activated
manually while an MLX telephone user with a headset is setting
up a conference.
The conference originator receives the Hold Reminder tone
when the conference is on hold for more than one minute as a
result of using the Hold button or adding other participants. If
Direct-Line Console (DLC) Operator Automatic Hold is
programmed and used by a DLC operator setting up a
conference, the entire conference goes on hold.
Both sides of an inside call cannot be put on hold. Therefore, if
the user presses the Hold button while waiting on hold for a
conference initiated by another user (an inside call), or if the
user presses the Conference button while waiting on hold on
an inside call, all participants are disconnected.
If the user presses the Conference button while Inspect is
activated, Inspect is canceled and the system tries to activate
the Conference feature.
When a user joins a conference by using a shared outside line
or Shared SA button, the QCC display reflects the correct
number of participants. However, if the QCC operator uses the
Inspect feature to verify the number of participants, the number
shown on the display does not include participants joining the
conference on a shared button.
The Conference feature cannot be used on the MFM because
the system ignores the switchhook flash sent by the MFM.
If the first participant put on hold for a conference is an outside
call, the caller hears Music-on-Hold until the second participant
is added. When a conference originator puts the conference on
hold, Music-on-Hold is not activated.
Speakerphone and loudspeaker paging calls cannot be added
to a conference.
Conference calls cannot be parked.
A conference call cannot be picked up at another telephone. A
conference originator can, however, pick up a call and add it to
the conference.
A single-line telephone user with a Recall button adds a
participant to a conference call and connects all participants by
using the Recall button. In addition, the Recall button can be
used to drop the most recently added participant or to drop a
busy number.
100 Conference