Instruction manual

Features
Camp-On
At a Glance
Users Affected
Reports Affected
Mode
Telephones
Programming Code
Feature Code
MLX Display Label
System Programming
Factory Settings
Return Interval
Telephone users, operators
System Information
All
All (except single-line telephones)
*57
57
87 (Call Waiting Pickup)
Camp On [Camp] → caller’s extension label
Change the amount of time before a camped-on call returns to
originator:
● Options → CampOn
90 sec (range 30-300, in increments of 10 sec)
Description
Camp-On allows a user to complete a transfer to a busy telephone. The call is
put on hold until the telephone can receive a call; then it rings automatically.
While the call is on hold, the caller (inside or outside) hears special ringback.
The person at the busy telephone hears a Call Waiting tone to indicate that a
call is waiting. If the call is not answered within the programmed Camp-On
Return Interval (30 to 300 seconds), the call returns to the originator. The
originator hears a priority ring (one ring and two beeps) to indicate a returning
Camp-On call.
Camp-On can also be used to complete a transfer to an extension that is not
busy. This can increase the amount of time before the call returns to the
originator because the return is timed according to the Camp-On Return Interval
(30-300 seconds) instead of the Transfer Return Interval (1-9 rings), Camp-On
can be activated by using either a programmed button or a feature code.
Considerations and Constraints
A Camp-on Return Interval of 30-300 seconds in increments of 10 seconds can
be programmed. The factory setting is 90 seconds.
Camp-On 79