Instruction manual
Table Of Contents
- Table of Contents
- About This Guide
- 1. Overview
- 2. Changing System Parameters
- Changing MERLIN MAIL—ML Port Allocation
- Changing the Delayed Answer Setting
- Adding, Changing, or Deleting a Fax Extension
- Changing the System Operator Extension
- Changing the General Mailbox Owner
- Changing the System Administrator’s Voice Mailbox
- Changing the Maximum Number of Digits in an Extension
- Changing the MERLIN MAIL—ML Language Selection
- 3. Changing the Schedule
- 4. Changing the Automated Attendant Menus
- 5. Adding and Changing Voice Mailbox Assignments
- 6. Creating, Changing, and Using Group Lists
- 7. Changing System Greetings
- 8. Troubleshooting
- A. MERLIN MAIL—ML Factory Settings
- B. Sending Faxes to the MERLIN MAIL—ML System
- Glossary
- Index
- Forwarding General Mailbox Messages
- Outcalling Administration
Changing the Automated Attendant Menus
5. [ 2 ] to play a submenu.
The system prompts you to enter a submenu number and [ # ].
6. Enter the submenu number followed by [ # ].
The system prompts you to select the menu prompt or the menu definition.
7. Choose an option:
— [ 1
] to play the submenu prompt.
The system plays the submenu prompt, then the system prompts you
to select the menu prompt or the menu definition.
— [ 2 ] to play the submenu definition.
The system plays the submenu Selector Codes and the corresponding
Selector Code Actions, then the system prompts you to select the
menu prompt or the menu definition.
8. Choose an option:
— Repeat Step 7 to play the submenu prompt or submenu
definition.
— [ * ] [ # ] to return to the Submenu Administration Menu.
Creating and Changing Submenus
4-19