Instruction manual
Table Of Contents
- Table of Contents
- About This Guide
- 1. Overview
- 2. Changing System Parameters
- Changing MERLIN MAIL—ML Port Allocation
- Changing the Delayed Answer Setting
- Adding, Changing, or Deleting a Fax Extension
- Changing the System Operator Extension
- Changing the General Mailbox Owner
- Changing the System Administrator’s Voice Mailbox
- Changing the Maximum Number of Digits in an Extension
- Changing the MERLIN MAIL—ML Language Selection
- 3. Changing the Schedule
- 4. Changing the Automated Attendant Menus
- 5. Adding and Changing Voice Mailbox Assignments
- 6. Creating, Changing, and Using Group Lists
- 7. Changing System Greetings
- 8. Troubleshooting
- A. MERLIN MAIL—ML Factory Settings
- B. Sending Faxes to the MERLIN MAIL—ML System
- Glossary
- Index
- Forwarding General Mailbox Messages
- Outcalling Administration
Changing System Parameters
5. Select one of the following options:
— [ 1
] to set up for monolingual operation.
— [ 2
] to set up for bilingual operation.
The system plays the Language Selection Menu and prompts you to select
the system language (monolingual mode) or primary language (bilingual
mode).
6. Select one of the following languages:
— [ 1 ] to select English
— [ 2
] to select French
— [ 3
] to select Spanish
If the MERLIN MAIL—ML system is set up for monolingual operation, the
system plays back the mode and language selected. Go to Step 8.
If you set up for bilingual operation, the system prompts you to enter the
secondary system language.
7. (Bilingual Operation Only) Repeat Step 6 to select the secondary
system language.
The system plays back the mode and languages selected.
8. Choose one of the following actions:
— [ * ] [ # ] to confirm your selection.
This procedure is complete. The system plays the System Parameters
Menu.
— [ 1 ] to re-enter the language selection.
Go back to Step 6.
Changing the MERLIN MAIL—ML Language Selection
2-15