Instruction manual
Table Of Contents
- Table of Contents
- About This Guide
- 1. Overview
- 2. Changing System Parameters
- Changing MERLIN MAIL—ML Port Allocation
- Changing the Delayed Answer Setting
- Adding, Changing, or Deleting a Fax Extension
- Changing the System Operator Extension
- Changing the General Mailbox Owner
- Changing the System Administrator’s Voice Mailbox
- Changing the Maximum Number of Digits in an Extension
- Changing the MERLIN MAIL—ML Language Selection
- 3. Changing the Schedule
- 4. Changing the Automated Attendant Menus
- 5. Adding and Changing Voice Mailbox Assignments
- 6. Creating, Changing, and Using Group Lists
- 7. Changing System Greetings
- 8. Troubleshooting
- A. MERLIN MAIL—ML Factory Settings
- B. Sending Faxes to the MERLIN MAIL—ML System
- Glossary
- Index
- Forwarding General Mailbox Messages
- Outcalling Administration
Changing System Parameters
5. Enter one of the following options:
— Enter the number of digits (2, 3, or 4).
The new maximum number of digits plays back, followed by the
System Parameters Menu.
— [ * ] [ # ] to keep the current setting.
The System Parameters Menu plays.
Changing the MERLIN
MAIL—ML Language Selection
If necessary, you can switch the MERLIN MAIL—ML system between
monolingual and bilingual modes, or change the system language selections
to one of the following settings:
■
■
For monolingual mode:
— English
— French
— Spanish
For bilingual mode:
— English as the primary language and French as the secondary
language
— English as the primary language and Spanish as the secondary
language
— French as the primary language and English as the secondary
language
— Spanish as the primary language and English as the secondary
language
For bilingual mode, callers hear the Automated Attendant greeting
■
and menus in the primary language. Callers press [ * ] [ 1 ] for the
secondary language.
Changing the MERLIN MAIL—ML Language Selection
2-13