Instruction manual

Changing System Parameters
If you want Dial 0/Timeout calls directed to an extension other than the first
operator console on the MERLIN LEGEND system, enter that extension as the
system operator’s extension.
RECOMMENDATION:
Leave the factory setting 768, or choose another invalid extension if 768
is used in your dial plan. To verify that an extension is invalid, while
listening to the intercom dial tone, dial the extension. If you hear an
intercept (warble) tone, the extension is invalid, and can be used as the
MERLIN MAIL—ML system operator’s extension.
To change the system operator’s extension, follow the instructions below:
1. Log in to the MERLIN MAIL—ML system as the system administrator.
The system administrator’s name plays; then the Voice Mail Activity Menu
plays.
2. [ 9 ] to program the system.
The System Administration Menu plays.
3. [ 1 ] for System Parameters.
The System Parameters Menu plays.
4. [ 5 ] to change the system operator’s extension.
The current system operator’s extension plays, followed by a prompt to enter
the system operator’s extension number.
5. Enter one of the following options:
— Enter the new extension followed by [ #
].
The new system operator’s extension number plays, followed by the
System Parameters Menu.
— [ * ] [ # ] to keep the current setting.
The System Parameters Menu plays.
2-8 Changing the System Operator Extension