Instruction manual

1. Log in to the MERLIN MAIL—ML system.
2. Press [ 6 ] to administer Outcalling.
3. Select an option:
■ Press [ 1 ] to change your Outcalling number.
■ Press [ 3 ] to play the instructions for Outcalling.
■ Press [ 9 ] to turn Outcalling “on.”
■ Press [ 6 ] to turn Outcalling “off.”
4. Enter your Outcalling number as follows:
■
For a standard telephone number:
– Enter digits ([ 0 ]–[ 9 ]) and pauses ([ * ]) required to place the call. Include any
access numbers needed.
– Enter [ # ] at the end of the telephone number
Example: [ 9 ][ * ][ 1 ][ 8 ][ 0 ][ 0 ][ 5 ][ 5 ][ 5 ][ 2 ][ 0 ][ 2 ][ 0 ][ # ]
■
For a pager or beeper telephone number:
– Begin the number with [ # ] [ # ]
– Enter digits ([ 0 ]–[ 9 ]) and pauses ([ * ]) required to call the pager or beeper.
Include any access numbers needed.
– Enter
[ * ] to indicate each 1.5 second pause as required.
– Enter [ # ] at the end of the telephone number.
Example: To specify a pager telephone number, a 4.5 second pause, and a
call-back number, enter:
[ # ][ # ][ 9 ][ * ][ 5 ][ 5 ][ 5 ][ 1 ][ 2 ][ 3 ][ 4 ][ * ][ * ][ * ][ 5 ][ 5 ][ 5 ][ 3 ][ 4 ][ 5 ][ 6 ][ # ]
■
For a pager or beeper number that requires embedded [ # ] or exceeds 29
characters:
– On the MERLIN LEGEND System, program a System Speed Dial Number for
the required dialing sequence. Press the
[ Hold ] button to enter each pause.
– On the MERLIN MAIL—ML system, enter the System Speed Dial Number as
your Outcalling number.
Begin the number with [ # ]. Enter a 7.5 second pause after the System Speed
Dial number to ensure that the number has been completely dialed before
the MERLIN MAlL—ML system begins its Outcalling message. Enter a
[ # ] at
the end of the Speed Dial Number.
Example: To specify System Speed Dial Number 600 and a 7.5 second pause,
enter:
[ # ][ 6 ][ 0 ][ 0 ][ * ][ * ][ * ][ * ][ * ][ # ]