Instruction manual

MERLIN MAIL—ML System Programming
Programming the Touch-Tone Gate
To program for monolingual operation, refer to the Touch-Tone Gate setting on
MERLIN MAIL—ML Form C: Automated Attendant Service Greeting, and
follow the instructions below:
1.
2.
3.
4.
5.
Log into the MERLIN MAIL—ML system as the system administrator.
The system administrator’s name plays; then the Voice Mail Activity Menu
plays.
[9] to program the system.
The System Administration Menu plays.
[3] for Automated Attendant Service.
The Automated Attendant Service Administration Menu plays.
[5] to change the Touch-Tone Gate setting.
The current Touch-Tone gate setting plays.
Choose an option:
— [9] to set the Touch-Tone Gate to “On.”
—
[6] to set the Touch-Tone Gate to “Off.”
The Touch-Tone Gate setting plays followed by the Automated Attendant
Service Administration Menu.
3-46 Setting the Touch-Tone Gate