Instruction manual

MERLIN LEGEND Communications System Release 6.1
System Manager’s Guide 555-661-118
Issue 1
August 1998
Managing the System
Page 6-84Changing Posted Message Labels
6
Planning Guidelines 6
Messages 2 through 20 can be changed through programming. Message 1, DO
NOT DISTURB, cannot be changed.
Valid Entries
1 to 20
Each posted message can have a maximum of 16 characters.
Labels can contain capital letters, numbers, and eight types of characters:
ampersands (&), dashes (-), spaces, periods (.), commas (,), apostrophes (‘),
stars (*), and pound signs (#).
Task List: Changing Posted Message Labels 6
o Obtain Form 10a, Label Form: Posted Messages.
o If necessary, read “Labeling” in the Feature Reference for detailed
information about this feature.
o Plan changes using the planning guidelines above; record the new values
on Form 10a.
o Open the System Programming menu from the console or a PC with SPM.
o Program the change(s), following the instructions for “Posted Message” in
the “Labeling” section of
System Programming , Chapter 3, or the summary
programming instructions below.
o When you have finished, file Form 10a with the rest of the planning forms.
Programming Instructions 6
Console Procedure More→/DEHOLQJ→3RVW0HVVDJH→Dial message no.→
(QWHU→Drop→Enter message→(QWHU→([LW→([LW
PC Procedure

→

→

→Type message no.→

→
7
+
I
→
Type message→

→

→
