Instruction manual

MERLIN LEGEND Communications System Release 6.1
System Manager’s Guide 555-661-118
Issue 1
August 1998
Managing the System
Page 6-82Changing Trunk Labels
6
Task List: Changing Extension Directory Labels 6
o Obtain Form 2a, System Numbering: Extension Jacks.
o If necessary, read “Labeling” in the Feature Reference for detailed
information about this feature.
o Plan changes using the planning guidelines above; record the new values
on Form 2a.
o Open the System Programming menu from the console or a PC with SPM.
o Program the change(s), following the instructions for “Extension Directory”
in the “Labeling” section of
System Programming , Chapter 3, or the
summary programming instructions below.
o When you have finished, file Form 2a with the rest of the planning forms.
Programming Instructions 6
Changing Trunk Labels 6
Use this procedure to establish alphanumeric system labels that help display
telephone users identify the line or trunk being used.
To program on the system programming console:
Use the buttons next to the display and line/feature buttons to specify
alphanumeric characters and punctuation for labels. Use the template provided
with the MLX-20L telephone to see which line buttons correspond to which
alphanumeric characters.
To program with SPM:
Use the PC keyboard for labels. All letters appear on the screen in uppercase.
Planning Guidelines 6
The availability of the caller identification information may be limited by local-
serving (caller’s) jurisdiction, availability, or central office (CO) equipment.
Valid Entries
Each label can have a maximum of seven characters.
Console Procedure More→
/DEHOLQJ→'LUHFWRU\→([WHQVLRQ→Dial ext.
no.→
(QWHU→Drop→Enter label→(QWHU →([LW→
([LW→([LW
PC Procedure

→

→

→

→Type ext. no.→

→
7
+
I
→Type label→

→

→

→
