Instruction manual

MERLIN LEGEND Communications System Release 6.1
System Manager’s Guide 555-661-118
Issue 1
August 1998
Managing the System
Page 6-73Assigning Disallowed Lists to Extensions
6
10 numbers for each list (numbered 0 through 9)
8 lists for each system (numbered 0 through 7)
8 lists for each telephone
Task List: Changing Disallowed Lists 6
o Obtain Form 6f, Disallowed Lists and, as appropriate, the form(s) for
individual telephones: Forms 4b, 4d, 4e, 4f, 5a, 5b, or 5c.
o If necessary, read “Allowed/Disallowed Lists” in the Feature Reference for
detailed information about this feature.
o Plan changes using the planning guidelines above; record the new values
on the form(s).
o Open the System Programming menu from the console or a PC with SPM.
o Program the change(s), following the instructions for “Disallowed Lists” in
the “System Features” section of
System Programming , Chapter 3, or the
summary programming instructions below.
o When you have finished, file the form(s) with the rest of the planning forms.
Programming Instructions 6
Assigning Disallowed
Lists to Extensions 6
Use this procedure to assign established Disallowed Lists to individual
extensions.
Planning Guidelines 6
Each restricted extension can be assigned to more than one list.
Valid Entries
0 to 7
You can copy restrictions. See “Copy Call Restrictions” in the “Optional Extension
Features” section of Chapter 3,
System Programming .
Console Procedure
7DEOHV→'LVDOORZ→Dial list no. and entry
no.
→(QWHU→Drop→Dial no.→(QWHU→([LW
PC Procedure

→→Type list no. and entry no.→→
7
+
I→Type no.→→