Instruction manual

MERLIN LEGEND Communications System Release 6.1
System Manager’s Guide 555-661-118
Issue 1
August 1998
Managing the System
Page 6-18Programming from a PC with SPM
6
! Make a selection.
Exiting System Programming 6
Use the information in Table 6–5 to return to the System Programming menu, the
main menu (Menu Mode screen), or the Home screen.
Table 6–5. Exiting System Programming
Programming from a PC with SPM 6
The System Programming and Maintenance (SPM) software package offers an
alternative method of programming using a PC. This method frees the system
programming console for other uses and also provides additional functions. Using
a PC with SPM enables you and qualified service personnel to program the
system from offsite locations.
SPM runs on a DOS-based PC as a standalone package, or on a UNIX System
platform with Integrated Solution II or Integrated Solution III (IS II/III, no longer
available).
NOTE:
Beginning with version 4.25, required for Release 4.1 of the system, SPM
runs under Windows 95 as a DOS application. Beginning with version 6.25,
required for Release 6.1 of the system, SPM is available in a Windows
version called
Win SPM . It runs in Windows 95 and Windows NT.
Press the button or function key next to
your selection.
To return to: On the console press: On the PC press:
Previous menu
(or, in some
cases go to the
next item to
program)
([LW

Main menu Menu

Normal call
handling
Home
