Instruction manual

MERLIN LEGEND Communications System Release 6.1
System Manager’s Guide 555-661-118
Issue 1
August 1998
Managing the System
Page 6-17Programming from the Console
6
Access to System Programming 6
Follow the steps below to begin system programming from the system
programming console. To use this procedure, note the following:
■ The summary instructions are numbered.
■ The first column, “Console/Display Instructions,” illustrates the display
screens and indicates the console buttons to press.
■ The middle column, “Additional Information,” contains explanatory
information if necessary.
The System Programming menu in Step 4
is described in “System Programming
Menu” on page 6–8. For information about the procedure format, see “Using the
Programming Procedures” on page 6–3.
Console/Display Instructions Additional Information
! Display the Menu Mode (main menu) screen.
! Select System Programming.
! Display the System Programming menu.
Press the Menu
button.
If the programming console is a QCC, ([W
3URJUDP does not appear on this screen.
On the System Set-up screen, system
information appears in place of
the Y s.
6L]H = Large
7\SH = Key, Hybrid/PBX, or Behind Switch
2SHUDWRU = Position extension numbers
Select ([LW